Login at ZEZ AUTO

**bereja** · (This post was last modified: 09-15-2021, 04:37 PM by bereja.)

CM2350B Central

Error when it reaches 100% recording with calterm IV

Incal DO90036.02

I've already tried for both cans and already enabled the parameter "C_J1939_GTISCompliant" in the calibration

any tips on where i'm going wrong?

**IceXN** · 09-29-2021, 07:51 PM

From what i have understood you need efilive to unlock/disable dodges security bs first

**zyNoT** · 09-29-2021, 11:12 PM

(09-29-2021, 07:51 PM)IceXN Wrote: From what i have understood you need efilive to unlock/disable dodges security bs first

It can be done in Calterm, but yes the ECU must be in 'Unlocked' state first before you can do anything.

**bereja** · (This post was last modified: 10-02-2021, 04:51 PM by bereja.)

(09-29-2021, 07:51 PM)IceXN Wrote: From what i have understood you need efilive to unlock/disable dodges security bs first

What would unlock/disable be?

Calibration DO90037.01 writes 100% to the control unit via calterm IV.
Without crashing at 100%.

Calibration DO90036.02 hangs after 100%. I have to unlock by 5volt jumper.

Edit......

Calterm IV manages to "'Unlocked'" in "efilive"

**IceXN** · 10-05-2021, 05:54 PM

personally ive never tried it, and I use Calterm 5.3