+- ZEZ AUTO (https://www.zezauto.com)
+-- Forum: Suggestion, Selling & Damaged Links Box (https://www.zezauto.com/Forum-Suggestion-Selling-Damaged-Links-Box)
+--- Forum: Software Requests (https://www.zezauto.com/Forum-Software-Requests)
+--- Thread: dodge ram error calibrating with calterm (/Thread-dodge-ram-error-calibrating-with-calterm)
dodge ram error calibrating with calterm - bereja - 09-15-2021
CM2350B Central
Error when it reaches 100% recording with calterm IV
Incal DO90036.02
I've already tried for both cans and already enabled the parameter "C_J1939_GTISCompliant" in the calibration
any tips on where i'm going wrong?
RE: dodge ram error calibrating with calterm - IceXN - 09-29-2021
From what i have understood you need efilive to unlock/disable dodges security bs first
RE: dodge ram error calibrating with calterm - zyNoT - 09-29-2021
(09-29-2021, 07:51 PM)IceXN Wrote: From what i have understood you need efilive to unlock/disable dodges security bs first
It can be done in Calterm, but yes the ECU must be in 'Unlocked' state first before you can do anything.
RE: dodge ram error calibrating with calterm - bereja - 10-02-2021
(09-29-2021, 07:51 PM)IceXN Wrote: From what i have understood you need efilive to unlock/disable dodges security bs first
What would unlock/disable be?
Calibration DO90037.01 writes 100% to the control unit via calterm IV.
Without crashing at 100%.
Calibration DO90036.02 hangs after 100%. I have to unlock by 5volt jumper.
Edit......
Calterm IV manages to "'Unlocked'" in "efilive"
RE: dodge ram error calibrating with calterm - IceXN - 10-05-2021
personally ive never tried it, and I use Calterm 5.3