[Aleksey-MS]

Remote Install VAG - ODIS-E, ODIS-S, VAS PC, ETKA, ELSA

Acronis image VAG: ODIS-Service 7, Engineering 12, Flash files 2021, ELSA, ETKA - $150
Acronis image VAG: ODIS-Service 5.2, Engineering 9.2, Flash files 2020, ELSA, ETKA - $99

ODIS Engineering 12 - $60
ODIS Service 6 or 7 - $60
It works on Win 10 x64.
ODIS Engineering (Offboard Diagnostic Information System Engineering) software for VAG ECU firmware.
ODIS Service (Offboard Diagnostic Information System Service) dealer software for working with Audi, VW, Seat, Skoda, Lamborgini, Bentley.

Compatibility (Program + Windows + VCI):
ODIS 7 - Win 10 x64 - VAS5054/6154, Passthru
ODIS 6.2 - Win 10/7 x64 - VAS5054/6154, Passthru
ODIS 13 - Win 10 x64 - VAS6154, Passthru
ODIS 12.2 - Win 10/7 x64 - VAS5054/6154, Passthru
ODIS 9.2.2 + 5.2.7 - Win 10/7 х32/х64 - VAS5054/6154, Passthru

It works with original or clone:

• VAS5054
  
• VAS 6154
  
• CarDAQ-Plus
  
• OpenPort 2.0
  
• Other PassThru J2534.
  

It is possible to “flash” control units using ODIS Service, but only having official online access to VAG servers. Working without this access, you will have access to guided diagnostics, coding, adaptation, launching convenient service tests and procedures.

VAG ODIS Online VW or Audi or Skoda:

• 1 year - $1490
  
• 1 month - $199
  
• 1 day - $69
  
• 1 day Lamborghini - $670
  
• 1 hour - $49
  

VAS PC 19.01.01 - $45


ETKA 8.2, ELSA 5.3 or 6.0 - $99
The ETKA electronic catalog contains complete information on spare parts and accessories for VAG vehicles (VW, Seat, Skoda, Audi), including minibusses.


ELSA Win - $50
information base/car repair manual for VW AG. It contains descriptions of repair and maintenance technology.

VAG TPI - $25
TPI - Technical Problem Information from VAG.

VAG Helper - $25
The VAGHelper program was originally developed as a calculator of light parameter values for Skoda Octavia A5 FL cars. However, at present, the program also supports other co-platform PQ35 cars (VW, Audi, Seat), in which the comfort unit is combined with BCM. Starting with version 0.0.1.12, the program has the ability to generate an STT file for updating the firmware in blocks using a VAS PC.

The interface and configuration files are available in Russian, English, Polish.
Values can be written using VAS PC, ODIS Engineering.


Need it? Write to me for details.