[Younes Rouzky]

Description

Update: 12.2020
Size: 331 Mb
Region: All regions
Type: Diagnostic Tool for International, Detroit, Navistar
Language: English
SO: Win 10, Win 8, Win 7, Win Vista, Win XP
Instruction: Present
Installation: multi pc's
Version: 15766
Database Version: 335
High speed download link



Need it? Push buttons Rate (Reputation) and Thanks, PM for pass.



Diamond Logic Builder 12.2020 (DLB) provides high performance diagnostics for electrical systems in international trucks and high performance IC buses. DLB Fleet displays vehicle signals in graphic and text format. This software also reads and displays the vehicle’s diagnostic trouble codes, as well as the vehicle’s characteristics and parameters.

International Diamond Logic Builder (DLB) [2020] Level 3 All options are open, all parameters are editable

Recommended adapters:

NEXIQ Technologies – USB-Link2
Dearborn Group Technologies – DPA 5
Noregon Systems, Inc. – DLA +, DLA + Wireless

Recommended interface cables:

NEXIQ Technologies – Link-2
Dearborn Group Technologies – DPA 5
Noregon Systems, Inc. – DLA, DLA USB

Communication link controllers:

DLB uses RP1210A standard controllers for communication. The controllers are specific to the communications device and are not installed with DLB.

User permits:

Diamond Logic Builder has different levels of permissions in levels that allow a more advanced use of the software.

Level 1 (Diagnosis): L1 is included with the active product key.
Level 2 (Diagnosis and programming of parameters): access to L2 requires the completion of web-based training for each user.
Level 3 (Diagnosis, Parameter Programming and Advanced Logic): Access to L3 requires that the Led Instructor training be completed for each user.

You do not need a CYY or DYY account; We have taken care of it and yours is just to enjoy the software.

All options are open, all parameters are editable.

Navistar Engine Diagnostics is a diagnostic and programming service tool for Navistar Engines. Navistar Engine Diagnostics, a full-featured PC application, is designed to meet the wide range of service diagnostic challenges of a mixed truck fleet. Coverage includes all J1939 international electronic engine systems. It allows you to monitor the control system, recover diagnostic trouble codes (DTCs), change parameters, view and plot engine data, and perform specialized service compartment tests on all after-treatment systems and engines. The application also has regular updates, which guarantee the most up-to-date coverage.

Software features:

Control of the control system
Watch
Record
Save
Play instant recordings
Problem diagnosis codes
Retrieve, View, Delete
HD-OBD Freeze Frame Data
HD-OBD monitors
Monitor the results
Preparation for diagnosis
Monitor the performance ratio
View, save print
Service Bay Tests
key on, engine off
Actuator tests
Intermittent fault sensor
Cold start test
Engine running
Air management test
Cylinder cutting test
Engine fan test (if equipped)
High pressure pump test
Post-treatment system tests
Procedures
Calibration of the sensor
Replacements of parts
Programmable parameters
Motor characteristics settings
See Programming
Change Programming
Restoration of the service interval

Needs: One or more communication devices compatible with RP1210A with SAE J1708 and / or SAE J1939

---

Description

Update: 12.2020
Size: 331 Mb
Region: All regions
Type: Diagnostic Tool for International, Detroit, Navistar
Language: English
SO: Win 10, Win 8, Win 7, Win Vista, Win XP
Instruction: Present
Installation: multi pc's
Version: 15766
Database Version: 335
High speed download link



Need it? Push buttons Rate (Reputation) and Thanks, PM for pass.



Diamond Logic Builder 12.2020 (DLB) provides high performance diagnostics for electrical systems in international trucks and high performance IC buses. DLB Fleet displays vehicle signals in graphic and text format. This software also reads and displays the vehicle’s diagnostic trouble codes, as well as the vehicle’s characteristics and parameters.

International Diamond Logic Builder (DLB) [2020] Level 3 All options are open, all parameters are editable

Recommended adapters:

NEXIQ Technologies – USB-Link2
Dearborn Group Technologies – DPA 5
Noregon Systems, Inc. – DLA +, DLA + Wireless

Recommended interface cables:

NEXIQ Technologies – Link-2
Dearborn Group Technologies – DPA 5
Noregon Systems, Inc. – DLA, DLA USB

Communication link controllers:

DLB uses RP1210A standard controllers for communication. The controllers are specific to the communications device and are not installed with DLB.

User permits:

Diamond Logic Builder has different levels of permissions in levels that allow a more advanced use of the software.

Level 1 (Diagnosis): L1 is included with the active product key.
Level 2 (Diagnosis and programming of parameters): access to L2 requires the completion of web-based training for each user.
Level 3 (Diagnosis, Parameter Programming and Advanced Logic): Access to L3 requires that the Led Instructor training be completed for each user.

You do not need a CYY or DYY account; We have taken care of it and yours is just to enjoy the software.

All options are open, all parameters are editable.

Navistar Engine Diagnostics is a diagnostic and programming service tool for Navistar Engines. Navistar Engine Diagnostics, a full-featured PC application, is designed to meet the wide range of service diagnostic challenges of a mixed truck fleet. Coverage includes all J1939 international electronic engine systems. It allows you to monitor the control system, recover diagnostic trouble codes (DTCs), change parameters, view and plot engine data, and perform specialized service compartment tests on all after-treatment systems and engines. The application also has regular updates, which guarantee the most up-to-date coverage.

Software features:

Control of the control system
Watch
Record
Save
Play instant recordings
Problem diagnosis codes
Retrieve, View, Delete
HD-OBD Freeze Frame Data
HD-OBD monitors
Monitor the results
Preparation for diagnosis
Monitor the performance ratio
View, save print
Service Bay Tests
key on, engine off
Actuator tests
Intermittent fault sensor
Cold start test
Engine running
Air management test
Cylinder cutting test
Engine fan test (if equipped)
High pressure pump test
Post-treatment system tests
Procedures
Calibration of the sensor
Replacements of parts
Programmable parameters
Motor characteristics settings
See Programming
Change Programming
Restoration of the service interval

Needs: One or more communication devices compatible with RP1210A with SAE J1708 and / or SAE J1939

---

Description

Update: 12.2020
Size: 331 Mb
Region: All regions
Type: Diagnostic Tool for International, Detroit, Navistar
Language: English
SO: Win 10, Win 8, Win 7, Win Vista, Win XP
Instruction: Present
Installation: multi pc's
Version: 15766
Database Version: 335
High speed download link



Need it? Push buttons Rate (Reputation) and Thanks, PM for pass.



Diamond Logic Builder 12.2020 (DLB) provides high performance diagnostics for electrical systems in international trucks and high performance IC buses. DLB Fleet displays vehicle signals in graphic and text format. This software also reads and displays the vehicle’s diagnostic trouble codes, as well as the vehicle’s characteristics and parameters.

International Diamond Logic Builder (DLB) [2020] Level 3 All options are open, all parameters are editable

Recommended adapters:

NEXIQ Technologies – USB-Link2
Dearborn Group Technologies – DPA 5
Noregon Systems, Inc. – DLA +, DLA + Wireless

Recommended interface cables:

NEXIQ Technologies – Link-2
Dearborn Group Technologies – DPA 5
Noregon Systems, Inc. – DLA, DLA USB

Communication link controllers:

DLB uses RP1210A standard controllers for communication. The controllers are specific to the communications device and are not installed with DLB.

User permits:

Diamond Logic Builder has different levels of permissions in levels that allow a more advanced use of the software.

Level 1 (Diagnosis): L1 is included with the active product key.
Level 2 (Diagnosis and programming of parameters): access to L2 requires the completion of web-based training for each user.
Level 3 (Diagnosis, Parameter Programming and Advanced Logic): Access to L3 requires that the Led Instructor training be completed for each user.

You do not need a CYY or DYY account; We have taken care of it and yours is just to enjoy the software.

All options are open, all parameters are editable.

Navistar Engine Diagnostics is a diagnostic and programming service tool for Navistar Engines. Navistar Engine Diagnostics, a full-featured PC application, is designed to meet the wide range of service diagnostic challenges of a mixed truck fleet. Coverage includes all J1939 international electronic engine systems. It allows you to monitor the control system, recover diagnostic trouble codes (DTCs), change parameters, view and plot engine data, and perform specialized service compartment tests on all after-treatment systems and engines. The application also has regular updates, which guarantee the most up-to-date coverage.

Software features:

Control of the control system
Watch
Record
Save
Play instant recordings
Problem diagnosis codes
Retrieve, View, Delete
HD-OBD Freeze Frame Data
HD-OBD monitors
Monitor the results
Preparation for diagnosis
Monitor the performance ratio
View, save print
Service Bay Tests
key on, engine off
Actuator tests
Intermittent fault sensor
Cold start test
Engine running
Air management test
Cylinder cutting test
Engine fan test (if equipped)
High pressure pump test
Post-treatment system tests
Procedures
Calibration of the sensor
Replacements of parts
Programmable parameters
Motor characteristics settings
See Programming
Change Programming
Restoration of the service interval

Needs: One or more communication devices compatible with RP1210A with SAE J1708 and / or SAE J1939