[zyNoT]

Hello, have a couple question for you guys, hoping you can help me out...
 
 I tried hooking up to a 2018 x15 for an uprate and I couldn't connect. Im running 7.6 sp5 with elias modified insite program. It lets me see the files for the x15 but the truck wont connect. What version insite do I need and where can I get a working copy?

 Another question, I just downloaded the latest incal, seems the password changed from nd** or oc** does anybody have the new pass?

Then my last question, if I get the new files unlocked (2/19) will  the ecfg's that are out there work with these files or will I need all new config files?

Not many 18s come my way, but I have noticed that my 7.6 hooked to a 2016 and some 2017 wont identify all trouble codes and there's some that I cant clear out. Haven't had a problem flashing them though. The 2017 was a 6.7 in a freightliner. What are most of you guys using? 

look forward to the replies, Thanks guys....

You need newer version of INSITE in order to connect to some X15's. In testing I was able to connect/program/reset X15s if they were 2017 engines with 2018 chassis. 

Newer password is a longer one of random characters and has changed a few times as Cummins has brought new discs out. If you are looking to repack them my repacker will work for even the latest files. 

As for X15's that will work with 7.6, you would need to update FIS & PMD data so that you can see all the fault codes and descriptions when connecting to them. You can pull this data from newer versions of INSITE. 

I use INSITE 8.5.1 right now and works well but has problems with older trucks and wants to forcibly update ECM software which can be a problem if a truck is running a custom calibration.