DDDL 8.08 w/HW Level 10 + R&W Level 10 (10/10/10 All Parameters)

DDDL 8.08 w/HW Level 10 + R&W Level 10 (10/10/10 All Parameters) - Printable Version

+- ZEZ AUTO (https://www.zezauto.com)
+-- Forum: Suggestion, Selling & Damaged Links Box (https://www.zezauto.com/Forum-Suggestion-Selling-Damaged-Links-Box)
+--- Forum: Selling Box (https://www.zezauto.com/Forum-Selling-Box)
+--- Thread: DDDL 8.08 w/HW Level 10 + R&W Level 10 (10/10/10 All Parameters) (/Thread-DDDL-8-08-w-HW-Level-10-R-W-Level-10-10-10-10-All-Parameters)

Pages: 1 2

DDDL 8.08 w/HW Level 10 + R&W Level 10 (10/10/10 All Parameters) - zyNoT - 07-20-2018

Hi guys,

I have DDDL 8.08 with Hardware Level 10, and Read/Write Level 10.

$150/PC locked. V.I.P users $100/PC locked.

Discount if buying in larger quantities. PM me if interested.

***NOTICE***

IF YOU ALREADY PURCHASED R1 or R2:

Activator has been updated to R3, please PM me for free update.

R3 New features & fixes:

-Support for SP2 or SP3

-Fixed issue regarding Identification Tab not loading.

R2 New features & fixes:

-Fixed issue on programming specific CPCs.

-Fixed issue with read and write mismatch error on specific ECMs.

-Write Level set from 4 to 10*

-Read Level set from 3 to 10*

*Levels set to 10 to allow programming of ECMs that require it.

RE: DDDL 8.08 w/HW Level 10 + R&W Level 4 (3/4/10 All Parameters) - DieselDwarf - 07-20-2018

Thank you!

RE: DDDL 8.08 w/HW Level 10 + R&W Level 4 (3/4/10 All Parameters) - ISXCUMMINSGUY - 07-20-2018

I see most are read wright 3/3 what will 4 allow you to do.. Just courious

RE: DDDL 8.08 w/HW Level 10 + R&W Level 4 (3/4/10 All Parameters) - zyNoT - 07-20-2018

(07-20-2018, 07:26 PM)ISXCUMMINSGUY Wrote: I see most are read wright 3/3 what will 4 allow you to do.. Just courious

It allows you to write engine builder (factory) parameters for new engine groups.

RE: DDDL 8.08 w/HW Level 10 + R&W Level 4 (3/4/10 All Parameters) - alicestar - 07-20-2018

works good on new emissions finally a real engineering activator. ty zynot

RE: DDDL 8.08 w/HW Level 10 + R&W Level 4 (3/4/10 All Parameters) - alphacode - 07-21-2018

(07-20-2018, 07:38 PM)zyNoT Wrote:
(07-20-2018, 07:26 PM)ISXCUMMINSGUY Wrote: I see most are read wright 3/3 what will 4 allow you to do.. Just courious

It allows you to write engine builder (factory) parameters for new engine groups.

There are new CPC parameters for newer engine models. Level 4 along with hardware level 10 allows access to not only read them but modify them. For users with Read 3, Write 3, and HW 10 they would be able to see these parameters and they would show up not grayed but you could not change them. It enables some extra features within the program too.

RE: DDDL 8.08 w/HW Level 10 + R&W Level 4 (3/4/10 All Parameters) - Rocinante - 07-21-2018

With so many activators that aren't full engineering out there I figured I should write a review. I've evaluated using this activator and can say it works 100%. It's a real "engineering" version which gives access to all parameters even more than previous versions allowed. In the files zynot sent me there are some features and settings that are new that he points out in his document along with new parameters I've found when connecting to the newest EPA engines.

RE: DDDL 8.08 w/HW Level 10 + R&W Level 4 (3/4/10 All Parameters) - XeroG - 07-21-2018

zynot is so helpful. he spent hour on the phone with me helping me set this up and at no additional cost. its working good i can do delete now properly. sam chassis is programmable now didn't even think this was possible. thank u!

RE: DDDL 8.08 w/HW Level 10 + R&W Level 4 (3/4/10 All Parameters) - DeepZero - 07-21-2018

Something I noticed; DDDL starts up faster too using this activator.

RE: DDDL 8.08 w/HW Level 10 + R&W Level 4 (3/4/10 All Parameters) - Sensei - 07-21-2018

(07-21-2018, 12:11 PM)DeepZero Wrote: Something I noticed; DDDL starts up faster too using this activator.

its faster and works better with EPA 17 engines.