+- ZEZ AUTO (https://www.zezauto.com)
+-- Forum: Heavy Vehicles (https://www.zezauto.com/Forum-Heavy-Vehicles)
+--- Forum: Trucks And Buses Hardware & Discussions (https://www.zezauto.com/Forum-Trucks-And-Buses-Hardware-Discussions)
+--- Thread: Kess Help needed for Volvo (/Thread-Kess-Help-needed-for-Volvo)
Kess Help needed for Volvo - Seikov - 05-19-2018
Hello Mates
I have a Kess V2 5.017 CLONE , trying to connect to Volvo ECU. I tried at least 3-4 different trucks and I keep having the same error "Wake up error".
I read it under protocol 176 and also try 339. I have original CAT J1939 9 Pin connector, but keep having this issue. Also tried External Reading trough Bench Harness and still no lick. Tried 2 different Kess's without success. Thinking that I might have some wrong connection. Any help guys, any advise?
Thank you
Best Regards
RE: Kess Help needed for Volvo - sp33d - 06-16-2018
Trw protocol is 1708 the cat is j1939.. have to use the obd renaultvolvo plug with a 1939 converter to connect to the 1708 side
RE: Kess Help needed for Volvo - Seikov - 06-21-2018
would you know by any chance the number of the cable so I can order it? '
Thank in advance mate
RE: Kess Help needed for Volvo - sp33d - 06-21-2018
It's something k17 obd Volvo .. I just read a 2009 Volvo with the cat j1939 .. so I don't really know .you have to power up for at least 5 mins then keep on kess til it goes
RE: Kess Help needed for Volvo - sp33d - 07-23-2018
I have used both cables to read the Volvo trw 176 no problems obd volvo Lucas 1708 and 9 pin cat
RE: Kess Help needed for Volvo - Baikal - 11-06-2018
were you able to read full memory ? or just 64kb?
RE: Kess Help needed for Volvo - kamiar - 02-02-2020
(11-06-2018, 11:00 PM)Baikal Wrote: were you able to read full memory ? or just 64kb?
with 9 pin CAT cable only 64KB