+- ZEZ AUTO (https://www.zezauto.com)
+-- Forum: Heavy Vehicles (https://www.zezauto.com/Forum-Heavy-Vehicles)
+--- Forum: Trucks And Buses Software & Discussions (https://www.zezauto.com/Forum-Trucks-And-Buses-Software-Discussions)
+--- Thread: [FILES ONLY] Calterm 4.1.3 (/Thread-FILES-ONLY-Calterm-4-1-3)
[FILES ONLY] Calterm 4.1.3 - zyNoT - 03-24-2018
Hello all,
Cummins just released Calterm v4.1.3.
This release fixes a few various bugs found in v4.1.2.
For a full changelog, please PM me or look via CUM Update Manager.
Calterm 4 v4.1.3 Release
This release is an update to Calterm 4 versions 4.0 and 4.1, and replaces Calterm III and CaltermX. This build uses the latest PCLWrapper version 3.1.8.18055 and the latest PMD version 2.0.13.18067.
Change Requests and Defects Fixed:
2394778: Calterm IV Compare Report - How Tables are display with Missing Axes
2398753: Subfile Compare Report- Calterm 4
2405543: Change Table refresh hotkey from F3 to F6
1682737: F1 wiindows stays after closing calibration source.
2110731: Calterm4- Lower logging capabilities experienced with Calterm4-
2147052: Calterm4 displays empty tables for array parameter in Hex/Binary
2217679: Calterm 4 Calibration upload window incorrectly sized for multi-module systems
2286230: Remove messagebox for invalid ecms during detection and log error in event log instead
2296788: Calterm freezes when opening calibration after keyswitch off with module
2327906: Calterm CLI Assemble not working
2328002: Log file doesn't have all parameters in the screen.
2328040: Calterm monitoring grays out when a string parameter is added to screen for bcx module
2342370: Calterm 4 is taking very long time (>120seconds) to start logging the screens
2353723: Enforce Range Limits and Clip to Range Limits Tools Options is broken on Calterm 4
2393118: Calterm 4 will not allow subfiles to be moved or renamed until the tool is closed.
2393126: EDM Ver 2 was not being supported correctly by Calterm 4
2393128: SPEED Download cancel issue
2395960: need to use detected product id for RFC instead of selected in Catlerm 4
2398013: PFCWrapper should set timeout and retry values based on protocol
2402515: Calterm 4 screen files do not include the xml header
2405542: IDL Logging does not log with correct logging rate
2280731: Calterm 4 is not swapping bytes for modules with Intel byteorder in export files
2217679: Calterm 4 Calibration upload window incorrectly sized for multi-module systems
RE: [FILES ONLY] Calterm 4.1.3 - RenoX - 04-04-2018
(03-24-2018, 11:04 PM)zyNoT Wrote: Hello all,
Cummins just released Calterm v4.1.3.
This release fixes a few various bugs found in v4.1.2.
For a full changelog, please PM me or look via CUM Update Manager.
Calterm 4 v4.1.3 Release
This release is an update to Calterm 4 versions 4.0 and 4.1, and replaces Calterm III and CaltermX. This build uses the latest PCLWrapper version 3.1.8.18055 and the latest PMD version 2.0.13.18067.
Change Requests and Defects Fixed:
2394778: Calterm IV Compare Report - How Tables are display with Missing Axes
2398753: Subfile Compare Report- Calterm 4
2405543: Change Table refresh hotkey from F3 to F6
1682737: F1 wiindows stays after closing calibration source.
2110731: Calterm4- Lower logging capabilities experienced with Calterm4-
2147052: Calterm4 displays empty tables for array parameter in Hex/Binary
2217679: Calterm 4 Calibration upload window incorrectly sized for multi-module systems
2286230: Remove messagebox for invalid ecms during detection and log error in event log instead
2296788: Calterm freezes when opening calibration after keyswitch off with module
2327906: Calterm CLI Assemble not working
2328002: Log file doesn't have all parameters in the screen.
2328040: Calterm monitoring grays out when a string parameter is added to screen for bcx module
2342370: Calterm 4 is taking very long time (>120seconds) to start logging the screens
2353723: Enforce Range Limits and Clip to Range Limits Tools Options is broken on Calterm 4
2393118: Calterm 4 will not allow subfiles to be moved or renamed until the tool is closed.
2393126: EDM Ver 2 was not being supported correctly by Calterm 4
2393128: SPEED Download cancel issue
2395960: need to use detected product id for RFC instead of selected in Catlerm 4
2398013: PFCWrapper should set timeout and retry values based on protocol
2402515: Calterm 4 screen files do not include the xml header
2405542: IDL Logging does not log with correct logging rate
2280731: Calterm 4 is not swapping bytes for modules with Intel byteorder in export files
2217679: Calterm 4 Calibration upload window incorrectly sized for multi-module systems
this guy is the best he got this activated for me and spent time to help me.