Hood won't unlatch - Peterbilt 387 - Printable Version +- ZEZ AUTO (https://www.zezauto.com) +-- Forum: Heavy Vehicles (https://www.zezauto.com/Forum-Heavy-Vehicles) +--- Forum: Trucks And Buses Hardware & Discussions (https://www.zezauto.com/Forum-Trucks-And-Buses-Hardware-Discussions) +--- Thread: Hood won't unlatch - Peterbilt 387 (/Thread-Hood-won-t-unlatch-Peterbilt-387) |
Hood won't unlatch - Peterbilt 387 - zyNoT - 03-24-2018 Trying to help a friend with a truck. The truck appears to have a hood latch on both the driver side and one on the passenger side. The driver's side works fine, you go under the hood and pull a loop cord which releases the latch. The passenger side's loop cord is missing, the hole is there but no cord. He says it was there previously and one day he came outside and it was missing, animals? idk?? Anyway, is there another way to release the latch on the passenger side without pulling the loop cord? Can't get underneath the hood to fix the problem until it has been unlatched. Thanks for your help! RE: Hood won't unlatch - Peterbilt 387 - burrows_03 - 03-24-2018 There is normally some sort of trip lever that can hooked with a with a O ring pick or a piece of wire threaded threw it to work the unlocking mechanism in most cases RE: Hood won't unlatch - Peterbilt 387 - alicestar - 03-24-2018 (03-24-2018, 09:53 PM)burrows_03 Wrote: There is normally some sort of trip lever that can hooked with a with a O ring pick or a piece of wire threaded threw it to work the unlocking mechanism in most cases Do u know where the trip lever would be located? i dealt with one long ago can't remember. RE: Hood won't unlatch - Peterbilt 387 - burrows_03 - 03-24-2018 The right hand side should be a mirror of the left. Try to follow left hand side pull cable to get a general idea as to location of the trip. Where the cord used to be. Hook the lever with something or at least that is what I've had to do in the past? RE: Hood won't unlatch - Peterbilt 387 - kwdriver - 03-25-2018 is this one with the handle in the cab? the remote latches suck. if aftermarket u need to see where they were installed. RE: Hood won't unlatch - Peterbilt 387 - zyNoT - 03-25-2018 Thank you all! I ended up figuring it out. The guy placed the string and loop into the hole to get it out of his way the last time he worked on it. I took some videos and pictures to help someone who ends up in this particular situation. You may need a metal clothes hanger or something with a hook on it to pull the string, not easy to get to when the hood is closed. Hope this helps someone! |