VGT Turbo - Printable Version +- ZEZ AUTO (https://www.zezauto.com) +-- Forum: Heavy Vehicles (https://www.zezauto.com/Forum-Heavy-Vehicles) +--- Forum: Trucks And Buses Hardware & Discussions (https://www.zezauto.com/Forum-Trucks-And-Buses-Hardware-Discussions) +--- Thread: VGT Turbo (/Thread-VGT-Turbo) |
VGT Turbo - Number8 - 12-16-2023 Hello everyone! I'm new here and hoping I'll be able to find the help I need or the answers. I've got a 2013 ISX CM2250 that the previous owner had deleted the VGT turbo and it seems that the engine brake doesn't work as good as a truck with the VGT. Is there a way to tune the current setup to have a better engine brake and if not how complicated would it be to re install a VGT turbo as far as tuning goes? RE: VGT Turbo - zyNoT - 12-16-2023 (12-16-2023, 11:49 AM)Number8 Wrote: Hello everyone! No. The 3rd stage jake will not work without the VGT. You need to re-install the VGT and re-flash vehicle. RE: VGT Turbo - Gearheart - 12-27-2023 3rd stage isn’t exactly an engine brake. It’s an exhaust brake controlled by the VGT Turbo. I shake my head at guys that ask me “isn’t it better to delete the pesky VGT?”. Drive around for a week with only stages 1 & 2 and tell me how you like it. In the flat lands it might be something you could live with, however up here in the PNW at maxi loads putting us at 105k+ lbs, we need all the help we can get. Not to mention fuel consumption losses, reduced engine life, etc. if someone tells you to swap the cam, politely walk away. Now going forward, suck it up and get a VGT back on there. Yeah they are expensive, but that’s trucking for ya. Then find a reputable tuner (or attempt creating a file yourself if you’re brave enough) and get that thing running right. |