+- ZEZ AUTO (https://www.zezauto.com)
+-- Forum: Heavy Vehicles (https://www.zezauto.com/Forum-Heavy-Vehicles)
+--- Forum: Trucks And Buses Software & Discussions (https://www.zezauto.com/Forum-Trucks-And-Buses-Software-Discussions)
+--- Thread: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update (/Thread-PACCAR-ESA-ALL-VERSIONS-KG-SW-Folder-Update)
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - kwdriver - 03-31-2018
(03-29-2018, 09:38 PM)ISXCUMMINSGUY Wrote: Oh ok I will work on it later., I had found a copy on a hard drive from my last computer and moved it over and it works not thanks Ill update my version another time.
using same version alpha is works great all trucks
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - Seikov - 04-22-2018
Hi Guys
I need some help with step 6.
Should I copy all the folders into C:\ProgramData\PACCAR\VPD\ESA\Data?
I am also having trouble asking for activation license all the time. I set the expiry date within only 6 months and it keeps on asking for activation.
Any help will be appreciate
Thanks
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - burrows_03 - 04-22-2018
Put all the lisence keys in then close the program copy and paste the software update then open the program.
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - alphacode - 04-22-2018
(04-22-2018, 03:42 PM)Seikov Wrote: Hi Guys
I need some help with step 6.
Should I copy all the folders into C:\ProgramData\PACCAR\VPD\ESA\Data?
I am also having trouble asking for activation license all the time. I set the expiry date within only 6 months and it keeps on asking for activation.
Any help will be appreciate
Thanks
If you put too long of a date this will happen. It will also happen if you put the full activation code in the top box. Don't change that at all. Just put each group into each group box and click "Renew License". Close the program and re-open and it shouldn't ask for activation again. You just copy and paste the contents of the SW folder into the SW folder of that location. You only need one set of SW files, just pick the latest version.
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - Seikov - 04-22-2018
(04-22-2018, 05:23 PM)alphacode Wrote:(04-22-2018, 03:42 PM)Seikov Wrote: Hi Guys
I need some help with step 6.
Should I copy all the folders into C:\ProgramData\PACCAR\VPD\ESA\Data?
I am also having trouble asking for activation license all the time. I set the expiry date within only 6 months and it keeps on asking for activation.
Any help will be appreciate
Thanks
If you put too long of a date this will happen. It will also happen if you put the full activation code in the top box. Don't change that at all. Just put each group into each group box and click "Renew License". Close the program and re-open and it shouldn't ask for activation again. You just copy and paste the contents of the SW folder into the SW folder of that location. You only need one set of SW files, just pick the latest version.
Thank you alphacode. Yes thats what I did but it keeps on asking for activation.
Do I have to copy the regkey.dat somewhere? Can it be because I do step 6 wrong?
Any suggestions?
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - Seikov - 04-24-2018
So I finally figured it out guys.
Here is the what I did in case someone else face the same problems as me.
Need to install framework 4.7. Before installing version 5.xxx need to install the first one 4.xxx then update to 5.xxx
Extract the Keygen, Once we open License file and click "Yes", run the KG.
Put each generated Key in the box and on top where its written "License" insert the hole key on the bottom of the Keygen.
Password Admin I wrote 12345.
Close the program.
DELETE THE EXTRACTED KEYGEN (Let it be only in (Winrar (Winzip)) then reopen.
If we dont delete it it will ask for Activation License.
Hope my little guide help you guys.
Best Regards
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - alphacode - 04-25-2018
(04-24-2018, 09:09 AM)Seikov Wrote: So I finally figured it out guys.
Here is the what I did in case someone else face the same problems as me.
Need to install framework 4.7. Before installing version 5.xxx need to install the first one 4.xxx then update to 5.xxx
Extract the Keygen, Once we open License file and click "Yes", run the KG.
Put each generated Key in the box and on top where its written "License" insert the hole key on the bottom of the Keygen.
Password Admin I wrote 12345.
Close the program.
DELETE THE EXTRACTED KEYGEN (Let it be only in (Winrar (Winzip)) then reopen.
If we dont delete it it will ask for Activation License.
Hope my little guide help you guys.
Best Regards
You did many steps you didn’t have to. You did exactly what I said not to do. You don’t put the license key in the top at all. You just put the renew key in and click Renew. You don’t need to put password in either. You don’t need version 4.4.x installed prior either. I’m glad you got it working, but you took many steps that weren’t necessary.
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - mcquown84 - 07-02-2018
does this allow program i wanna do some egr deletes
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - burrows_03 - 07-02-2018
This paccar cecu diagnostic program. For pete and kw. Cab and chassis controllers
RE: PACCAR ESA - ALL VERSIONS + KG + SW Folder Update - nminton2 - 07-19-2018
do you have new sw files got a truck says it need 4/18 update