[Remix_Velozity]

good luck, i have 5 dead ecms on my desk until i figured out how to fix this.  Even if your cummins is licensed for MD you still wont be able to edit and flash files - but you can put stock ones in.

only way to do edited ones is editing live on the ECM to allow it to accept edited files(or flashing the "unlocked file), and it is not as simple as unlocking with calterm.  Fair warning with calterm on dodge aswell.  since you are using the backbone 1939 if for any reason the flash fails before 99% you now essentially have a brick.  when in ROM boot those dodge ECM's shut the communication down on the pins.  only way to bring it back is with a ktag/transdata etc and it aint fun.

anyone who tells you different hasnt actually done one and been the guy standing there when it fails.  i read so many threads about dodges and the misinformation out there is staggering.

its much safer through the OBD and can be recovered that way, it just requires more file structure/security knowledge.

Thank you havent been able to find any info on any of this. At this point I just want to load the stock one back in. Will the cab have any problems with the RSA handshake when plugged in back to the ecm?