Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Doser Fuel Line Pressure High
#1
Hey guys. I have a 2012 dd15 epa10. Def has been demandated on this truck.

For a year now this same check engine light comes on about 20 minutes after start of the truck and driving.

I checked the fault and its "Doser Fuel Line Pressure High"
Number 4077
Confirmed, active  permanent 

Any idea how to remove this by going into parameters?

Thanks in advance
#2
Whoever did delete did not do it properly.
If I helped in any way, please give THANKS + REP!

Cummins INSITE 8.x/9.x+Fleet Cals, Password Resets
Cummins Calterm 5.16.0
Calterm Master Tool Ultimate v10.3
Cummins INCAL Tool v8.5
CNH 9.2 Dealer or Engineering
Wabco 13.6 Engineering
DDDL 8.20 - Levels 10/10/10
CAT ET 2024A + Perkins 2024A + FPKG/AutoGen
SR 4.12 Engineering
Bendix ACOM Pro 2024
Allison DOC 2024
JPRO 2024
Remote Tuning for all Cummins engines. PM for Quote.
#3
(01-07-2020, 10:43 PM)zyNoT Wrote: Whoever did delete did not do it properly.

I agree with you. I would like to know if this can be fixed by changing some parameters.
#4
(01-07-2020, 11:09 PM)GonTruckin Wrote:
(01-07-2020, 10:43 PM)zyNoT Wrote: Whoever did delete did not do it properly.

I agree with you. I would like to know if this can be fixed by changing some parameters.

no it will need to be wiped and start over with a proper file for the truck and go from there.  DDDL isnt going to save you on that one.
[-] The following 1 user says Thank You to Unilevers for this post:
  • zyNoT
#5
(01-08-2020, 01:11 PM)Unilevers Wrote:
(01-07-2020, 11:09 PM)GonTruckin Wrote:
(01-07-2020, 10:43 PM)zyNoT Wrote: Whoever did delete did not do it properly.

I agree with you. I would like to know if this can be fixed by changing some parameters.

no it will need to be wiped and start over with a proper file for the truck and go from there.  DDDL isnt going to save you on that one.
I agree with this statement.
If I helped in any way, please give THANKS + REP!

Cummins INSITE 8.x/9.x+Fleet Cals, Password Resets
Cummins Calterm 5.16.0
Calterm Master Tool Ultimate v10.3
Cummins INCAL Tool v8.5
CNH 9.2 Dealer or Engineering
Wabco 13.6 Engineering
DDDL 8.20 - Levels 10/10/10
CAT ET 2024A + Perkins 2024A + FPKG/AutoGen
SR 4.12 Engineering
Bendix ACOM Pro 2024
Allison DOC 2024
JPRO 2024
Remote Tuning for all Cummins engines. PM for Quote.
  


Forum Jump:


Users browsing this thread:
12 Guest(s)